pressure die casting machine for tubular plate

Usages:Mainly used in casting the positive spine of tubular lead acid battery,with low antimony content(less than 3%),such as IP

Composition:Host,Lead pot,Electric panel,Mould

Features:

Use machinery pressure system to control the machine,with big pressure,and running stable.

Use heating pipe to melting the lead,and the temperature can be automatically controlled with a range of adjustment.

Use heating pipe to heat the nozzle,mould,display and control the

temperature with pressure meter,with alarm fuction(when temperature

too high).

Use cycle water to cool the mould.

The mould use H13 special mould material to produce according to the layout.Using safety interlock,automatically do the folloing compound mould,casting spine,open  mould,push-out(this is one cycle).to promise safety production.

Electrical panel:Use Siemens PLC to control,and use screen to display

The operation mode and parameters;with Manual and Auto type.And you can

enter parameters according to requirements.

 

Specification&Parameter:

Parameter Type	spine length (mm)	Spine Diameter (mm)	Capacity of Lead pot(T)	KW	Production capacity (pcs)
WF-300	≤300	≥1.8	1	42	4
WF-300D	≤300	≥1.8	1	42	6-8
WF-500	≤500	≥3.2	1	45	4
WF-500D	≤500	≥3.2	1	48	6-8
WF-700	≤700	≥3.2	1	48	4

 

EXPLANATION:”D” MEANS DOUBLE-PLATE

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/452830615_1/pressure_die_casting_machine_for_tubular_plate.jpg' , 'http://i01.i.aliimg.com/photo/v0/452830615_2/pressure_die_casting_machine_for_tubular_plate.jpg' , 'http://i01.i.aliimg.com/photo/v0/452830615_3/pressure_die_casting_machine_for_tubular_plate.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); pressure die casting machine for tubular plate